> Qashqai 2 > Rear brake pads

Rear brake pads

Chapter 1 : Intro

Necessary tools8 Tools

Toolbox

13mm spanner

17mm spanner

Brake caliper windback tool

Wheel lug wrench

Torque wrench

Flat head screwdriver

Lifting tools2 Tools

Hydraulic jack

Axle stand

Nos ressources

Les warnings de la Clé

Once the operation is completed, you'll need pump slowly on the brake pedal a few times until feeling a strong resistance from the pedal. The aim being to bring the brake pads closer to one other.

Drive smoothly and avoid sudden braking for the first 50 kilometres or so to avoid glazing the new pads.

Make sure to check the stability of your vehicle before starting the operation.

Don't burn yourself on the pads if you've just gone for a drive as braking creates friction and long-lasting heat.

Les infos de la Clé

What do we mean by "glazing new brake pads"? Break pads are made of a material that needs to be run-in when new. If this procedure is not done properly, when braking too hard, the material overheats and hardens. Consequently, the brakes become less effective.

To watch

Our useful videos

[ USETOOL'S TIPS & TRICKS ] Lifting your vehicle safely

[ USETOOL'S TIPS & TRICKS ] Removing and reinstalling a wheel

UseTool EN

Disclaimer

This video was created for information purposes and does not guarantee the outcome of actions undertaken. To ensure that you see the best results, we recommend getting in contact with qualified technicians who will carry out the installation. This video provides tips and recommendations that can be useful when repairing or changing parts. MCD12 and its partners cannot be held responsible for any physical and material damage that comes from the poor installation or incorrect interpretation of the video content. This video was created for information purposes and does not guarantee any outcomes. The user is solely responsible for the incorrect use of repair machines, tools and parts, in particular if these may cause physical damage. MCD12 and its partners recommend taking great care and carefully following the safety rules when carrying out the repair or replacement of any parts. Please keep in mind that using poor quality parts compromises the safety of the driver when on the road.